Window Menu; New Window (Window Menu); Bcc And Re; Connection Status To The Batch Control Server - Siemens SIMATIC BATCH Operating Manual

Context help references

14.4 BCC and RE

Additional information
Validation (Page 1049)
Display errors (Page 1103)
Display all errors (Page 1103)
14.3.5

Window menu

14.3.5.1

New window (Window menu)

Function
Opens an additional view for the current window.
14.4 BCC and RE
14.4.1

Connection status to the BATCH Control Server

The status of the BATCH Control Server is shown on the right of the status bar. The connection
to the BATCH control server can assume the following statuses:
Symbol in the status bar
In some situations, a progress bar is also displayed for processes that require longer.
1104
Redundant configuration
Both master and standby BATCH
Control Servers are available.
The master server in a redundant con‐
figuration is available. Its standby
server is not available.
A redundancy switchover cannot take
place in this status.
Neither of the two redundant BATCH
control servers is available.
The BATCH Control Center is not
ready to use.
Non-redundant configuration
The BATCH Control Server is
available.
-
The BATCH Control Server is
not available. The BATCH Con‐
trol Center is not ready to use.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA