Starting Batchcc - Siemens SIMATIC BATCH Operating Manual

Status icons of the BATCH Launch Coordinator
The icon contains a status display for SIMATIC BATCH. The potential states are listed in the
table below.
Symbol
Note
Combined states with Processing, Switch up, Running Prepared, Switch down, Listening
Prepared are temporary, for example, during the redundancy switchover of a BATCH server.
Additional information
BATCH Launch Coordinator (Page 35)
9.1.2

Starting BatchCC

Following installation of SIMATIC BATCH, you will find the following components in the
Windows start menu under Siemens Automation > SIMATIC > BATCH:
● SIMATIC BATCH Control Center: This starts BatchCC.
● SIMATIC BATCH Launch Coordinator. This starts the BATCH Launch Coordinator.
● SIMATIC BATCH Recipe Editor: This starts the BATCH Recipe Editor.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Meaning
No status icon. No connection to the BATCH project. The BATCH project is not
loaded and SIMATIC BATCH is waiting for BATCH data. Or the BATCH data is
loaded, but the server applications have not yet started.
SIMATIC BATCH is ready (Ready). The BATCH project is loaded and started.
Intermediate state. A status change is in process (Processing).
Intermediate state. Preparing to switch to the "Running" state (Running Prepared).
SIMATIC BATCH is running (Running) on BATCH master or BATCH single station
system. The BATCH project is loaded, started and BATCH Runtime is started.
SIMATIC BATCH is running (Listening) on BATCH standby. The BATCH project
is loaded, started and BATCH Runtime is started.
Intermediate state. Preparing to switch to the "listening" state (Listening Prepared).
Intermediate state, switching to BATCH master (Switch up). Switching the state
from Listening to Running.
Intermediate state, switching to BATCH standby (Switch down). Switching the
state from Running to Listening.
Error in SIMATIC BATCH (Fault).
BATCH Control Center
9.1 Starting and operating
245