Propagate Types - Siemens SIMATIC BATCH Operating Manual

14.1.12.54

Propagate types

Dialog box
In this dialog box the batch types of the multiproject are propagated for all included projects.
After executing the "Propagate types" function, the batch types will be up-to-date in the
included projects. If a compare of the CFC charts should be required then this will be executed
automatically.
Project
Shows all projects of the multiproject with a batch process cell.
Note
Projects that have been removed for processing are indicated by a transparent symbol. The
batch types cannot be propagated on these projects; the check box is grayed out.
Include
If you activate the check box in the column header, all batch types for all projects will be
propagated. In the column you can also activate projects individually for inclusion.
Path
Paths of all projects of the multiproject with a batch process cell.
Batch process cell
Name of the batch process cell project.
Type status
The following status displays are possible:
● Up-to-date: The local types are identical to the types of the multiproject (master).
● Not up-to-date: The local types are not identical to the types of the multiproject (master).
Result
Results of the propagate action. Specifically the following results are possible:
● OK
● Error. See the "Propagate" log for details.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
941