Allocation Statuses Of Batch Steps - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.8 Batch control
9.8.5.13

Allocation statuses of batch steps

Independent display of allocation status
The allocation status is displayed independently of the idle status together with the sequence
marker:
Different marking when allocating units or equipment procedure element (EPE)
It is important that the marking be different when allocating a unit or EPE. In the hierarchical
recipe, RUP controls the allocation of units and the equipment phase controls the allocation
of EPEs. In the flat recipe both are allocated by the equipment phase.
Allocation with a hierarchical recipe
Allocation with a flat recipe
432
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA