Visualization And Operator Control Of Transition Conditions - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.4 Applications in process mode
Image 11-2
When you click on the symbol, you jump to the corresponding batch step in the "Instruction"
tab. You can also select the batch step in the navigation area and open the "Instruction" tab.
The instruction text is displayed in the "Instruction" tab; click the "Apply" button to acknowledge
it. Batch processing then continues.
Pending operator instructions are automatically displayed in the message list of the
"Messages" tab. This tab also offers the functions "Apply" and "Jump to instruction".
11.4.13

Visualization and operator control of transition conditions

BATCH OS Properties control, "Condition" tab
If a master recipe you are using contains transition conditions for enabling recipe steps, these
transition steps are displayed in solid black in the navigation area.
Satisfying a transition condition
If a transition is not step-enabled because the process does not meet the transition conditions,
manual step enable is possible using the "Complete step" command.
Displaying a transition condition
Click the transition in the navigation area to display the tab corresponding to the transition in
the tab area. Go to the "Condition" tab, where the transition condition is displayed.
636
Jump to instruction
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA