Siemens SIMATIC BATCH Operating Manual page 622

BATCH OS controls
11.3 Operations in process mode
Process actions and their confirmation in the dialog
A dialog appears for all your process actions to confirm the action you have triggered. All
actions in the confirmation dialog create messages in the control, providing you with important
information on process actions and the system.
Buttons:
Button
Icon
Check box
Yes.
Note: The button label may vary depend‐
ing on the action
Yes, all.
No.
Cancel
Close dialog
(Close button at the top right of the dialog.)
Title bar
Action symbol with message text
"Close dialog automatically in ... seconds"
check box
Table headers in the control
The control has the following table headers:
● Msg. no. Message number The message number is generated sequentially by the system.
● Status: In addition to the status information in text form, each message status also contains
a status symbol to make it easier to understand. See Icons for the message status.
● Message: Meaningful message in text form.
● Date: Time stamp of the message in the date format (DD.MM.YYYY) and time format
(SS:MM:HH) (UTC +1). UTC = Universal Time Code.
622
Meaning
You confirm the selected action by clicking "Yes".
You confirm the selected action for all objects by clicking
"Yes, all".
The selected action will not be performed.
Cancels one or more actions. The action will not be per‐
formed.
Closes the confirmation dialog with no action performed.
The action remains pending and can be performed at a
later point in time. To do this, open the message again.
A symbol suitable to the action is displayed with the dialog
name.
The corresponding symbol and the message text are
shown in the dialog for every action.
If you select the check box, the confirmation dialog is au‐
tomatically closed after a time specified by the system.
If you clear the check box, the dialog remains open until
you close it.
Operating Manual, 02/2016, A5E35958174-AA
SIMATIC BATCH V8.2