Siemens SIMATIC BATCH Operating Manual page 337

Property
Sync_14
<absolute path>
Number of connections
Synchronization point (node ID)
Comment (node ID)
Blocking (node ID)
A synchronization line with attributes has been added.
The added synchronization line is connected to two elements in the recipe and the following
attributes were allocated:
● Comment or description via "Properties" dialog of the synchronization line (SyncLine
comment)
● Comment or description specified via "Add comment" dialog for each of the two connection
points (SyncNode 2.1 Comment and SyncNode-2.2 Comment)
● The "Blocking" property was set to "No" at the connection point (NodeID2)
Property
Recipe_example_1
<Absolute path>
Recipe
Version
Last change
<Additional attributes>
Sync_15
<Absolute path>
Comment
Number of connections
Synchronization point (node ID1)
Comment (node ID1)
Blocking (node ID1)
Synchronization point (node ID2)
Comment (node ID2)
Blocking (node ID2)
Monitoring container
A monitoring container has been added.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Value (left side)
2
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58 (UTC
+2:00)
...
BATCH Control Center
Value (right side)
Synchronization line
3
ROP_8 - ROP_9
Yes
Value (right side)
Recipe
Recipe example
V2.0
01.06.2015
11:06:05 (UTC
+2:00)
...
Synchronization line
SyncLine comment
2
ROP_2 - ROP_5
SyncNode-2.1 Com‐
ment
Yes
ROP_4 - ROP_6
SyncNode-2.2 Com‐
ment
No
9.5 Recipes
337