Context Help References; Dialogs; Bcc And Re Dialog Box User Settings; Format" Tab - Siemens SIMATIC BATCH Operating Manual

Context help references

14.1

Dialogs

14.1.1

BCC and RE dialog box user settings

14.1.1.1

"Format" tab

The layout settings made here apply to working with the BATCH Recipe Editor and in the recipe
view during batch control.
Alignment
The alignment specifies the display of recipe objects at connecting points of simultaneous
branches (Page 514) and alternative branches (Page 514) in recipes. Depending on whether
the attachment points are to the left, centered or to the right, you obtain a different appearance.
If you change the option from "Left" to "Centered" or "Right", the view is changed immediately.
The option applies to libraries, master recipes and batches.
Step/transition:
The recipe phases (EOP/EPH) and the transitions can be displayed in four different views:
Display unit
With this option, you can prevent the display of the unit on the boxes of the steps in flat recipes.
When this option is activated, the name of the unit to which this EOP/EPH was assigned is
displayed on the recipe phase.
The unit appears, however, only when no setpoints have been selected for display.
Display single-line labeling larger
To make the texts in steps clearer, they are displayed in larger characters if this option is
enabled.
Display tooltips on the tools
If the option is active, the properties of the recipe steps are displayed as a tooltip.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
14
723