Configuration In The Graphics Designer; Inserting A Control In A Pcs 7 Os Process Picture - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls

11.2 Configuration in the Graphics Designer

requiring acknowledgment in the "SIMATIC BATCH OS Monitor" OS control or by clicking on
the corresponding icon in the toolbar of the "SIMATIC BATCH OS Master" OS control.
11.2 Configuration in the Graphics Designer
11.2.1

Inserting a control in a PCS 7 OS process picture

Working in the Graphics Designer
BATCH controls are configured in the Graphics Designer. In it you insert the desired control
in your process picture. You then set the control properties with the corresponding
dynamization or the properties dialog of Graphics Designer.
Requirement
A WinCC graphics file (*.pdl) is open in the Graphics Designer.
Procedure
1. Select the Control entry in the object palette under Smart Objects.
2. Left-click in the picture area and draw a rectangle keeping the left mouse button pressed.
Then release the left mouse button. You can change the size of the control later if needed.
3. Select the desired control in the "Insert control" dialog that opens. You can find all the
BATCH OS controls in the list under "SIMATIC BATCH OS ...".
Result
The result of the configuration is a process picture that can be used as an HMI platform for
SIMATIC BATCH.
Updating the controls
Change the control properties in the Graphics Designer and save them, your changes take
effect immediately when the picture changes in process mode.
588
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA