Compiling The Batch Process Cell Data In Single Project Engineering; Compiling The Process Cell Data In Multiproject Engineering - Siemens SIMATIC BATCH Operating Manual

Engineering
7.3 BATCH engineering
7.3.10

Compiling the Batch process cell data in single project engineering

Introduction
The process cell data is compiled by using the "Compile" function in the BATCH configuration
dialog. At the same time, the process cell data are checked for plausibility. Possible errors are
displayed and stored in a test log. If the data is not valid, it will not be compiled.
Procedure in the SIMATIC Manager
1. Open the BATCH configuration dialog with the menu command Options > SIMATIC
BATCH.
2. Select the "Batch instances" folder under process cell data in the left window.
3. Click the "Compile" button in the area on the right.
Result: If the validation is successful, the process cell data is compiled. A log is created
that you can display as follows:
In the BATCH configuration dialog: under Log >: "Compile" setting > "Display" button
4. Select the process cell object under process cell data in the left window.
5. Click the "Transfer to OS" button in the area on the right.
Result: A dialog opens with all operator stations of the project that were defined as Batch-
relevant when the settings were made in the "OS objects" tab. In the "Status" column, you
will see the current status displayed. Here, you can see whether or not the OS-relevant
data has already been transferred.
6. Press the "Start" button.
Result: The messages and the OS-relevant data are transferred. A log will be created that you
can display as follows:
In the BATCH configuration dialog: under Log -> "Transfer to OS" setting -> "Display" button
7.3.11

Compiling the process cell data in multiproject engineering

Introduction
The process cell data are compiled with the function "Compile" in the BATCH configuration
dialog. This means that the process cell data are checked for plausibility. Possible errors are
displayed and stored in a test log. If the data are not plausible they will not be complied.
Procedure in the SIMATIC Manager
1. Open the BATCH configuration dialog with the Options > SIMATIC BATCH menu command.
2. In the left window under process cell data select the "Batch instances" folder.
200
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA