Monitoring (Insert Menu) - Siemens SIMATIC BATCH Operating Manual

Inserting
If you insert synchronizations between the units of a hierarchical recipe in the BATCH Recipe
Editor, follow these steps:
1. Select the Insert > Synchronization menu command or the corresponding button in the
toolbar.
2. Drag the mouse starting between two objects of the first recipe unit procedure (RUP) to a
point between two objects of the recipe unit procedure (RUP) you want to synchronize. If
there are other sequences between the RUPs, these are not included in the synchronization.
Expanding
1. Select the Insert > Synchronization menu command or the corresponding button in the
toolbar.
2. Beginning at a synchronization point (junction between the sequence line and
synchronization lines) drag the mouse pointer until it is located between two objects of the
recipe unit procedure (RUP) you want to add in to the synchronization.
Removing a synchronization point
You can select and delete individual synchronization points or the synchronization line.
Properties
You can assign a name to the synchronization and decide whether or not execution is to be
halted individually for each synchronization point.
Appearance of the synchronization point:
A synchronization point is displayed as a double line and the sequence line is interrupted if a
synchronization point is for the sequence branch and the Blocking property was selected.
A synchronization point is displayed as a single line if a synchronization point is for the
sequence branch and the "Blocking" property was not selected.
A synchronization point is displayed as a double line and the sequence line is not interrupted
if it is not a synchronization point for the sequence branch.
You recognize synchronization lines lying on top of one another by the points displayed at the
ends or by selection of the synchronization lines. You recognize objects not connected to the
synchronization line (RUPs) from their notch.
10.4.5.9

Monitoring (Insert menu)

Overview
Process events can be monitored as well as a defined area of a recipe (monitoring area).
Monitoring is an independent recipe structure, which you configure in the Recipe Editor.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Recipe Editor
10.4 Creating recipes
541