Columnwidth; Columnorderandvisibility; Columnresizeenabled; Columnfiltervisible - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.5 Control properties references
11.5.5.2

ColumnWidth

String.
Specifies the width of the table columns in the control. The specified column width does not
depend on the column arrangement.
The default values for the column widths are as follows:
Table columns
Message number (Msg. no.)
Status
Message
Date
The values are separated by a semicolon and entered in the following syntax: 50;75;250;170.
The attribute can be dynamized with the ColumnWidth name.
11.5.5.3

ColumnOrderAndVisibility

String.
Specifies the sequence of the table headers in the control. The values in the following table
define the table column.
Table header
Message number, Msg. no.
Status
Message
Date
The values are separated by a semicolon and entered in the following syntax: 1;2;3;4. By
changing the sequence of the values, you make a corresponding change in the column
sequence.
The attribute can be dynamized with the ColumnOrderAndVisibility name.
11.5.5.4

ColumnResizeEnabled

Boolean variable.
This attribute specifies whether or not the column width of the table in the control can be
adapted by the operator. If Yes is set, an operator can adapt the column width in process mode.
Default: Yes, the column width can be changed.
The attribute can be dynamized with the ColumnResizeEnabled name.
11.5.5.5

ColumnFilterVisible

Boolean variable.
The attribute specifies whether or not a filter row is displayed for each table column.
666
Column width in pixels
50
75
250
170
Value
1
2
3
4
Operating Manual, 02/2016, A5E35958174-AA
SIMATIC BATCH V8.2