Batchnamepatternvisible; Batchdescription; Batchdescriptionvisible; Starttrigger - Siemens SIMATIC BATCH Operating Manual

11.5.4.31

BatchNamePatternVisible

Boolean variable.
With this attribute, you define whether or not the name under which the batch will be created
can be edited. The name displayed can be overwritten at any time with the "Create new batch"
function or a user input.
Default: Yes.
The attribute can be dynamized with the BatchNamePatternVisible name.
11.5.4.32

BatchDescription

String.
With this attribute, you specify a fixed text description for the batch to be created.
Default: empty, no text.
The attribute can be dynamized with the BatchDescription name.
11.5.4.33

BatchDescriptionVisible

Boolean variable
This attribute specifies whether or not a text box in which you can enter a batch description is
displayed in the control.
Default: Yes.
The attribute can be dynamized with the BatchDescriptionVisible name.
11.5.4.34

StartTrigger

Boolean variable.
Use this attribute in process mode to instruct the control to create a batch with the existing
settings. To use this function, set the attribute to Yes. When the control has created the batch,
the attribute is reset to No again.
If an error occurs during creation of a batch, the event "OnBatchCreationFault" is triggered.
You can react to this event by notifying the operator, for example.
Default: No.
The attribute can be dynamized with the StartTrigger name.
11.5.4.35

ToolbarOrderAndVisibility

String.
The attribute specifies the sequence of the toolbar symbols in the toolbar. If individual values
are not specified, the corresponding toolbar symbols are not displayed in the toolbar. Two
consecutive semicolons create a vertical line separator in the toolbar. This allows you to group
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH OS controls
11.5 Control properties references
663