Pcs 7 Os - Change Project Type - Siemens SIMATIC BATCH Operating Manual

3. Select the "Create/update archive tags" check box if you want to archive with automatic
assignment of an archive tag. This setting is effective for all parameters for which the
"S7_archive" attribute is set.
4. Confirm with "OK".
5. Select the menu command Options > Wizard Compile multiple OS > Start.
6. In the next Wizard dialogs, follow the normal procedures for PCS 7. Select the operator
stations, the S7 programs and then the scope of the compilation. There are no specific
SIMATIC BATCH settings necessary.
Note
The default compilation mode for PCS 7 is area-oriented compilation (OS area). This setting
can be changed by calling the menu command Options > Wizard Compile multiple OS >
Compile mode.
You cannot change between area-oriented and AS-oriented compilation within a project or
multiproject.
See also
How to compile and download the process cell data (Page 192)
7.2.2

PCS 7 OS - change project type

Change WinCC project type
If in WinCC Explorer you change the project type of a PCS 7 OS, for example from a multi-
user project to a single user project, then the OS Project Editor must be run in the complete
configuration mode. This is the only way for the necessary applications to be entered in the
PC's start-up list and to ensure data consistency in process mode.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
7.2 PC station (PCS 7 OS / WinCC Explorer)
Engineering
177