Check/Convert Es Data - Siemens SIMATIC BATCH Operating Manual

Path
Paths of all projects of the multiproject.
Batch process cell
Name of the batch process cell object.
Note
In projects that are removed for editing you can supplement the batch types of all batch process
cells with operation, phase, and process tag types. These batch process cells are indicated
by a special marking, a blue bar.
Type status
The following status displays are possible:
● Up-to-date: The local types are identical to the types of the multiproject (master).
● Not up-to-date: The local types are not identical to the types of the multiproject (master).
Propagate your batch types.
Note
The type status of the compile copy is displayed for projects that are removed for editing. Note
in this regard that the batch types in the project that has been removed for editing may be more
up-to-date than the batch types in the multiproject.
Compile status
Displays the results of the specific actions (propagate, update, and compile).
Start
Starts the compile and merge.
14.1.12.56

Check/convert ES data

Introduction
After installation of a new CFC/SFC version it may be necessary to convert the database
format. The BATCH configuration dialog will not open without a check.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
943