Equipment Properties (General)" Selection, Pcc - Siemens SIMATIC BATCH Operating Manual

Additional functions
Displays: All instance parameters that refer to this process tag type parameter are listed in a
dialog box. Certain attributes can be selected by means of a special filter.
OK button
Saves your settings and closes the dialog.
Cancel button
Closes the dialog without saving changes.
Help button
Opens the SIMATIC BATCH online help for this context.
14.1.13.16

"Equipment properties (General)" selection, PCC

Equipment properties (general) selection
You have selected the "Equipment properties (general)" object in the "Process cell data" list.
The following functions are exclusively possible with the PCC API:
● Functions such as configuring the distribution topology
● Downloading the project data
● Transferring the batch messages
● Reading/writing the EQM file
● Defining the environment variables
Note
Moving equipment properties
Opening the equipment properties in the process cell tree displays all equipment properties
of the process cell. These can be moved to any point within the equipment properties by
selecting and dragging them with the mouse. During recipe creation, the equipment
properties appear in the specified order in the parameter list of the recipe step.
Display
Below a project (cardinality project/process cell = 1:1) all available batch objects (batch types
and batch instances) are displayed in the process cell tree (left side of the dialog box), and
their attributes are displayed under Properties on the right side of the dialog box.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
1003