Siemens SIMATIC BATCH Operating Manual page 1084

Context help references
14.2 BCC menu commands
The import status of the individual elements are displayed as follows:
● A box with a check indicates that the element should be imported.
● An empty box indicates that the element should not be imported. If you do not import an
element, the imported recipe/library/formula category is not valid.
Make assignments:
● The Import Assistant checks if specific elements are already in the target process cell. If
any are, the Import Assistant suggests using these elements instead of the original
elements by automatically creating an assignment.
● If you want to change/create an assignment, mark the line with the element for which you
want to make an assignment and double-click on the corresponding element right in the
window listing those elements that are still available for assignment. You can optionally use
the left arrow instead of double-clicking.
● If you do not want to use an assignment, you can remove it using the appropriate command
from the context menu or the right arrow.
Result: The system checks if all elements with a check mark are unique. If an element is not
unique, import it with a new name/version/code or replace the affected element by the element
in the target process cell if it matches.
Libraries/formula categories/materials/roles
The objects to be imported (libraries, for example) are displayed in this column. The check box
indicates if the element should be imported. If you do not import an element, the imported
recipe/library/formula category is not valid.
Status displays:
Icon
New name
When available, a new name for the object to be imported can be specified here. Only this
name then appears following the import. If the name is already in use in the target process cell
and you do not wish to use (no assignment) the object in the target process cell, you should
rename the object at this point. Otherwise the import process cannot be further executed.
Double-click on the line or use the appropriate command from the context menu to change the
name. A dialog opens in which you can enter the required change.
Assigned
This displays the assigned element.
1084
Meaning
There is a conflict that must be resolved.
Data will be imported under a new name.
Data will be replaced by data from the target process cell.
Data will be imported unchanged.
Data have been deselected for the import.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA