Bcc Menu Commands; Program Menu; New Process Cell (Program Menu); Updating Of The Process Cell - Siemens SIMATIC BATCH Operating Manual

Context help references

14.2 BCC menu commands

Status
System error
Check/download OS
OK
Saves your settings and closes the dialog.
Cancel
Discards your settings and closes the dialog.
Help
Opens the online help for this context.
14.2 BCC menu commands
14.2.1

Program menu

14.2.1.1

New process cell (Program menu)

This function reads in the data of the basic control for a selected process cell. The data of
basic basic consists of the block instances of the SFC types created in the CFC charts or the
SIMATIC BATCH-specific blocks UNIT_BLOCK, IEOP, IEPH, EPAR, and TAG_COLL, as well
as the supplementary data in the hierarchy folders.
14.2.1.2

Updating of the process cell

If you have made changes to the BATCH-relevant process cell data (e.g., in CFC charts with
SFC types/BATCH interface blocks or to type descriptions) in the engineering system (ES),
you must update the process cell data in BatchCC.
Updating process cell data after changes in the engineering system (Page 290)
14.2.1.3

Print (Program menu)

With this function, you can start the printout of the data displayed in the list boxes in BatchCC.
14.2.1.4

Print preview

You can display a print preview of the selected data with this function. The print command is
also provided in the preview window. You cannot edit in the print preview.
1048
Symbol Remark
There was a system error when downloading.
The PCS 7 OS has not yet been correctly downloaded.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA