Siemens SIMATIC BATCH Operating Manual page 601

In addition, the extended statuses of the current batches are displayed overlaying the order
folder symbol.
Table 11-2
Order folder
symbol
The overlaid symbol is also displayed in the properties dialog of an order under Status.
Display area: The display area of the control displays the batch lists and the favorites list. Click
the desired tab to select one of the lists. Any batches can be transferred to the "Favorites" tab
from the Entire list, Planning list, and Status list.
Table 11-3
Icon
Overview lists (Planning list, Status list and Results list): When batches change their status
during process mode, they remain in their original list and are additionally entered into the list
corresponding to the status. Use the "Update data" command or a "Picture change" to remove
the batch whose status no longer matches from the lists.
Order list: A product name is only displayed in the "Product" column when all product names
of the batches in the order have the same name. In all other cases, a placeholder in form of
"<not unique>" is shown. A placeholder is also shown in the column when the units of measure
of the batches in the order are not identical. If the batches involved in an order have different
units of measure, the value "<not unique>" is displayed in the "Unit of measure" column. The
"Quantity" value from the order creation is displayed in the "Currently planned quantity" column.
As long as no batches are created in the order, a placeholder in form of "******" is displayed.
The actual order quantity is displayed in the "Actual quantity" column. A value is only displayed
if a process value reference was configured in the master recipe used for the batches. In
addition, at least one of the batches in the order must have reached its final state. The process
value is updated depending on the processing status of the batches included in the order. If
no process value reference is configured or if none of the batches in the order have reached
a final state, a hyphen is shown as placeholder.
Additional information: "General" tab (Recipe procedure properties) (Page 784)
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Overlaid order symbol
Overlaid Status
symbol
Operator input required
Error
Tabs in the Process cell control
Tab Meaning
Entire list Shows all batches for the selected folder in the navigation area
regardless of their status.
Planning list Shows planned and released batches for the selected folder in
the navigation area.
Status list Shows released and running batches for the selected folder in the
navigation area.
Results list Shows completed and aborted batches for the selected folder in
the navigation area.
Favorites Displays the batches that you added to the Favorites beforehand.
Order list Shows all orders for the selected folder of the batch process cell.
BATCH OS controls
11.3 Operations in process mode
601