Preview" Tab In The "Updating The Process Cell" Dialog - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
14.1.9.5

"Preview" tab in the "Updating the process cell" dialog

Introduction
The preview window displays all the changes in the engineering relevant to the BATCH process
cell and it can be printed out as documentation. This is the case in particular, if there are
changes to function types, for example when creating, deleting, modifying or even when adding
parameters of phase types.
Changes in the engineering that are displayed in the preview window
● "Name was changed from <%s> to <%s>"
● "Comment was changed from <%s> to <%s>"
● "Code was changed from <%s> to <%s>"
● "CFC chart was changed from <%s> to <%s>"
● "Online name was changed from <%s> to <%s>"
● "Type was changed from <%s> to <%s>"
● "Moved from <%s> to <%s>"
● "Version of data old:<%s> new:<%s>"
● "Unit was changed from %s(%d) to %s(%d)"
● "Data type was changed from %s(%d) to %s(%d)"
● "LL was changed from %g to %g"
● "HL was changed from %g to %g"
● "Order of the parameters was changed"
● "deleted"
● "new"
● "The number of possible allocations has changed from %d to %d"
● "Parameter %s RTName was changed <%s> <%s>"
● "Parameter %s New Value added"
● "Parameter %s Withdrawn Status was changed <%d> <%d>"
● "%s attribute changed from <%s> to <%s>"
The characters "<% followed by a letter>" or "% followed by a letter" are placeholders for
parameters.
"Print..." button:
With the "Print" button, the change log displayed in the preview window is output to a printer.
804
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA