Siemens SIMATIC BATCH Operating Manual page 377

3. Click the "..." button in the "Roles" column of the required operator action. Result: The
"Configure roles" dialog opens.
4. Here, select the user roles required to provide an electronic signature for the selected
operator action:
1. Confirm the settings with "OK". Result: All the signatures required and the necessary
sequence of signatures are displayed in the "Configured roles" table in the "ESIG" dialog
box. The check box in the "Active" column is only enabled and available for selection after
user roles have been assigned to an operator action. You can then enable or disable the
actions requiring signatures in the "Active" column.
2. In the "Sequence" column, select the actions for which the signatures must be entered in
a specific order per action if more than one signature is required.
3. The "All at once" check box is always selected for all operator actions; this represents the
default and cannot be modified. When more than one signature is required per operator
action, all signatures must be entered at the same time; in other words, all electronic
signatures of all required roles must be entered in an open signature dialog box.
4. When completed, confirm the configuration with the "OK" button.
Result
At runtime of the object (batch, RPH, ROP, RUP, transition), after the action is complete, the
dialog box "SIMATIC BATCH: Sign" opens. For information on entering electronic signatures,
refer to section "Signing operator actions (Page 378)".
Note
Once electronic signatures have been created, they can be deactivated but not deleted.
Project settings > Electronic signatures
In the "Electronic signatures" tab in the project settings, you can enable or disable other
operator actions related to an action centrally for the entire project. You will find more detailed
information in the section Electronic signatures tab (Page 739).
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Use this icon to move the "available roles" for operator input in the "Configured roles"
direction or back again to cancel already configured user roles.
Use these icons to specify the sequence in which signatures must be entered if multiple
signatures need to be obtained. First select the user role you want to arrange in order
in the "Configured roles" list.
BATCH Control Center
9.7 Electronic signature
377