Select Standard Role" Dialog; Manage Logons" Dialog; Location" Dialog - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
14.1.11.17

"Select standard role" dialog

Introduction
The permissions for user functions of selected standard roles are reset in this dialog. As a
result of this action, the user roles are reset to the initial default values in the delivery condition.
Requirement
On the "Individual permissions" tab of the permission management dialog, you have selected
the user group to which you want to reassign the default permissions of a user role.
Procedure
1. Select the user group to which you want to reassign default permissions. You must select
a check box for a user group in order for the "Assign default permissions..." button to
become active.
2. Select one of the six standard roles to reset the permissions of this user group to the delivery
condition.
3. Confirm your entries with "OK".
4. Click "Yes" in the security prompt that appears.
5. Your changes only take effect when you click the "OK" button in the "Permission
management" dialog.
Result
The customized permissions for user functions for the selected user group have been reset to
the default values.
14.1.11.18

"Manage logons" dialog

You reset the customized settings for selected user logons to default values in this dialog.
Select the check box for the relevant user and click the "Reset" button. In the dialog that then
appears, confirm that the user settings for the selected user or users were reset.
14.1.11.19

"Location" dialog

What do I set in this dialog box?
In this dialog you will enter the start and end location (source and target) of a material transport.
SIMATIC BATCH allocates the units and forwards the transfer parameters to SIMATIC Route
Control. SIMATIC Route Control executes the material transfer and reports to SIMATIC
BATCH that the transport has taken place successfully.
846
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA