Select Batch; Bcc Material Properties Dialog Box; Qualities" Tab (Materials); General" (Materials) Tab - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
14.1.7.5

Select batch

Selecting predecessor and successor batches
All batches, regardless of their status, are offered for selection. Select the desired predecessor
or successor batch for your chaining and click "OK". Click "Cancel" to discard your selection.
14.1.8

BCC Material Properties dialog box

14.1.8.1

"Qualities" tab (Materials)

Introduction
In this tab, you can edit, create, or delete the qualities of a material.
Delete:
If you have selected a quality for a material in the list, you can delete the quality from the
database with Delete. The deleted quality no longer appears in the list.
New:
Select New... to create a quality for a material in the database. In the "Properties of <quality>"
configuration dialog, you can enter the data for the new quality. The new quality appears in
the list.
14.1.8.2

"General" (Materials) tab

Introduction
In this tab, you can create or edit the materials.
Rules
● A material or a quality can have a maximum of 255 characters.
● The material code is alphanumeric and can have a maximum of 16 characters.
● The quality code is numeric and possible in the range 0 to 2147483647.
● Both the material name and the material code must be unique.
● The quality and the quality code must be unique within a material.
● When you delete a material, the system checks which recipes, libraries and formulas
contain use it. If this material is used there, it cannot be deleted.
796
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA