Siemens SIMATIC BATCH Operating Manual page 571

4. Make the desired settings:
– You can insert additional step enabling conditions with the "New" button.
– You can change an existing step enabling condition may marking it and pressing the
5. Change the logic operation of the individual conditions as required:
– Right click on a logic gate. A selection of Boolean logic operators appears. Select the
6. Confirm with "OK".
Entering properties
You enter the properties of the transitions in the following tab. The dialog for configuring a
condition appears by clicking the "New" or "Change" button. This is where you can specify the
type of operand (Parameter from the next highest recipe level, Process tag, RPE status,
Constant or Equation) of a condition. Use the "Help" button to get context-sensitive instructions
for each specific input/output field on the tab.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
"Change" button.
suitable logic operation.
BATCH Recipe Editor
10.4 Creating recipes
571