Siemens SIMATIC BATCH Operating Manual page 840

Context help references
14.1 Dialogs
Application
The BATCH applications required to execute the function appear here. For example, the
BATCH Control Center (BatchCC) and the BATCH Recipe Editor.
Note
Permissions for user functions for the BATCH application "OS Controls" are not marked in the
"Application" column. In general, the user functions also apply to the BATCH OS controls if
they are counted among the BATCH OS controls.
Manage logons...
Opens the "Manage logons" dialog. Customized settings of the appearance of BatchCC and
Recipe Editor are reset to the default values in this dialog.
Assign default permissions...
By clicking the "Assign default permissions" button, you open the "Select standard role" dialog.
You use this dialog to overwrite the permissions of a user group with the default permissions
of any other group.
First, select the user group to which you want to assign default permissions of another group.
The "Assign default permissions..." button is only enabled when a user group is selected.
Select one of the six standard roles to replace the permissions of the selected user group with
the permissions of the selected standard role. Confirm your changes with "OK". Click "Yes" in
the security prompt that appears. Your changes only take effect when you click the "OK" button
in the permission management dialog.
Generate info file...
Clicking "Generate info file ..." opens a selection dialog in which you can specify where the
"RightsInfo.html" information file should be saved. This file contains all information on user
roles and their established permissions for user functions in SIMATIC BATCH.
Additional information
Introduction to permission management (Page 278)
Specifying user permissions (Page 281)
Changing user permissions (Page 285)
Generating and displaying an info file with individual permissions (Page 287)
Select default role (Page 846)
840
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA