Active Applications (Options Menu); Compress Data (Options Menu); Start Recipe Editor (Options Menu); Start Viewer For Archived Batches (Options Menu) - Siemens SIMATIC BATCH Operating Manual

14.2.5.9

Active applications (Options menu)

Opens the "Elements being processed" dialog. The dialog is divided into a navigation area and
a display area. The navigation area shows the applications for the elements that a user is
editing. You use the node elements to open or close the tree structure. A bar is shown for the
allocated application in the display area. The time bar indicates the duration and the date and
time for the allocated application on this PC.
14.2.5.10

Compress data (Options menu)

With this command, you can compress the data (reorganize). Compressing does not change
the existing data.
Note: Compressing can take some time depending on the amount of data. During this time,
working with the system is restricted to some extent!
14.2.5.11

Start Recipe Editor (Options menu)

This function starts the BATCH Recipe Editor in BatchCC.
14.2.5.12

Start viewer for archived batches (Options menu)

You use this function to start the viewer for archived batches function in BatchCC. You use
the viewer to display and print archived batches in a control recipe.
14.2.5.13

Always on top (Options menu)

With this command, the window of the Batch Control Center always appears in the foreground,
regardless as to whether or not other software applications are open on the PC.
14.2.5.14 Migration > Finalize (Options menu)
When you update the BATCH project to a new software version of SIMATIC BATCH (for
example, a service pack), it may be necessary to adapt the project data to the requirements
of the new software version in BatchCC.
In such situations, you must select the Migration > Finalize menu command after installing the
new software version.
Please see the readme file for the new SW version to determine whether finalizing is necessary.
The necessary procedure for this is also described in the readme file.
14.2.5.15 Migration > Prepare (Options menu)
When you update the BATCH project to a new software version of SIMATIC BATCH (for
example, a service pack), it may be necessary to adapt the project data to the requirements
of the new software version in BatchCC.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.2 BCC menu commands
1079