Step 1: Archive And Remove Project(S) And Master Data Library In The Cmp; Step 2: Restoring And Inserting Project(S) And Master Data Library In The Dmp, And Adapting The Project - Siemens SIMATIC BATCH Operating Manual

Overview of the configuration tasks
Step 1 (Page 233): Archiving and removing project(s) and the master data library in the CMP.
Step 2 (Page 233): Restoring and inserting project(s) and master data library in the DMP, and
adapting the project.
Step 3 (Page 235): Editing, testing and archiving project(s) in the DMP.
Step 4 (Page 236): Restoring and inserting project(s) in the CMP.
8.5.2

Step 1: Archive and remove project(s) and master data library in the CMP

The project which you wish to transfer for editing must first be archived and then removed from
the multiproject. The master data library is then archived for the transfer.
Requirement
The central multiproject on the central engineering station has been created with all projects
of the MP, its AS and OS objects, the plant hierarchy, the batch assignment as well as the
master data library.
Procedure
1. Archive your project as a user project.
2. Remove the transfer project from your multiproject if is no longer needed. Select your
project folder, right-click and select the command Multiproject > Remove From
Multiproject in the context menu.
3. Archive your master data library. File > Archive > Libraries tab > select master data library
and click OK > Select the storage path and save.
If changes are made in the master data library, it is not necessary to synchronize AS projects
directly in CMP but first in DMP to optimize the time.
Result
The transfer project and the master data library are in a ZIP file ready for transfer to the DMP.
8.5.3 Step 2: Restoring and inserting project(s) and master data library in the DMP,
and adapting the project
Introduction
The project removed from a central multiproject and the corresponding master data library are
transferred to the engineering firm as a ZIP file. There, the project of the CMP is adapted to
the local environment to allow further configuration and subsequent testing (AS, OS and
BATCH process mode).
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Rational engineering
8.5 Distributed multiproject engineering
233