Formula Comparison - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.5 Recipes
9.5.9.4

Formula comparison

With a formula comparison, you can compare two formulas within a formula category.
The formula attributes are displayed on both sides in the comparison header, corresponding
to the selected filter. This is followed by the recipe parameters, transfer parameters and
parameters for output materials and input materials, corresponding to the selected filter. The
attributes are displayed on both sides here as well. The reason for the display on both sides
is that it is not possible to add or delete something in one formula and not in the other formula
within a formula category. Thus, only attributes can be changed.
Comparing formulas
Property
FormP1
<absolute path>
Name
Version
Recipe
Last change
Input material 1
<Absolute path>
Setpoint
Material name
Material code
Output material 1
<Absolute path>
Setpoint
Material name
Material code
Parameter1
<Absolute path>
Setpoint
346
Value (left side)
FormP1
V1.0
Recipe example
08.06.2015 14:36:58 (UTC
+2:00)
11
Input material 001
E001
15
Product 001
P001
20
Value (right side)
FormP1
V2.0
Recipe example
01.06.2015 11:06:05
(UTC +2:00)
21
Input material 002
E002
25
Product 002
P002
40
Operating Manual, 02/2016, A5E35958174-AA
Formula
Input material
Output material
Recipe parameters
SIMATIC BATCH V8.2