Display Of Parameter Interconnections - Siemens SIMATIC BATCH Operating Manual

BATCH OS controls
11.4 Applications in process mode
Table columns
Time offset
Start time
End time
11.4.8

Display of parameter interconnections

Display of interconnected parameters
Interconnected parameters (cross-interconnections and target interconnections) are displayed
and edited on the "Parameters" tab in the OS Properties control.
Symbol in the "Name"
table column
Each parameter row shown in which one of the three symbols above is displayed contains
command(s) to navigate to the corresponding parameter (source/target) in the shortcut menu.
For example, if you select the batch folder in the navigation area and have also selected the
"Parameters" tab, you will see all interconnected parameters of the control recipe of the batch
at a glance. In the shortcut menu, the symbols indicate which direction you can navigate in the
recipe hierarchy.
Additional information
Parameter interconnections (Page 561)
632
Meaning
The time offset (also known as
the GAP time), is the time be‐
tween the end and the start of
two chained batches.
Displays the original planned
start time for batches. The start
time is specified when the
batch is created.
Displays the end time originally
calculated. The end time is de‐
termined by the master recipe
used; it is calculated by the sys‐
tem.
Meaning
Part of a cross-interconnection.
Part of a target interconnection.
Part of a cross-interconnection and target interconnection.
Functions
Click a cell in the "Time offset" col‐
umn with the mouse for a chained
batch and enter the required time
offset in seconds. The successor
batch does not start until the time
offset you specified is reached.
None.
None
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA