Siemens SIMATIC BATCH Operating Manual page 1047

Component
If a download of individual components is necessary, the check boxes of these components
are set automatically and cannot be changed. After a successful download, the check boxes
are deactivated again and can be reactivated.
By selecting the check box in the "Component" column, all existing components are
downloaded.
PC station
The name of the higher-level PC station is displayed.
Target system
The computer name of the specific component is displayed.
Verify
For external target systems you can check whether the downloaded data are up-to-date by
clicking the button in this column. With this action the system checks whether the target
computer can be reached and whether the data are up-to-date. The result is displayed in the
"Status" column.
If you click the button in the column header, all components are checked.
Note
Components of local target systems are checked automatically.
Status
The following status displays are possible:
Status
Downloaded
No longer up-to-date
Non-existent or not configured
Check BATCH installation
Check WinCC installation
Check sharing
Unreachable
Project checked out
Not downloaded
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Symbol Remark
Process cell data downloaded. A new download process can be
triggered.
The downloaded data is no longer up-to-date. A new download
process can be triggered.
There is no BATCH installation on the target computer.
There is no WinCC installation on the target computer.
The BATCH folder "sbdata" is is not correctly shared or the share
name is not "BATCH". Permissions or release name must be
checked.
Remote PC station is not reachable, download is not possible.
The project with the required components is checked out.
No process cell data has been downloaded yet. The download can
be started.
Context help references
14.1 Dialogs
1047