Change Of Candidates" Dialog Box - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
Select the required master recipe or the required formula in the left or right window and confirm
your selection with the "OK" button.
To support your selection, you can activate the preview window. This shows the graphic
structure for the selected element.
Result: A master recipe and a formula were assigned to the batch.
Selected element
In this area of the dialog, you will see information about the selected master recipe or the
selected formula.
● Name: Name of the master recipe or the formula
● Type: Type of master recipe or formula. For example with master recipes, a hierarchical or
flat master recipe.
● Status: Release status of the master recipe or the formula. For example released for testing.
● Product: The product used in the master recipe. Example: Water.
"Properties" button:
If you select a recipe or a formula you can open the properties dialog of the master recipe or
formula using the "Properties" button. The various tabs of the dialog display all the parameters
of the master recipe or the formula.
"Preview" check box
If you select the "Preview" check box, the dialog is expanded by a new window on the right in
which the selected master recipe or formula is displayed graphically.
"AS-based" check box
This check box is only selected if you select a master recipe in which a recipe unit procedure
(RUP) is executed in the AS in the selection windows.
14.1.9.2

"Change of candidates" dialog box

Introduction
When a batch is released or when setpoints are changed online, this dialog displays the units
to be activated or deactivated in order to execute the action.
798
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA