Allocationslistcolumnfiltervisible; Simatic Batch Os Batch Creation; Communicationchannel; Ordercategoryname - Siemens SIMATIC BATCH Operating Manual

11.5.3.16

AllocationsListColumnFilterVisible

Boolean variable.
This attribute specifies whether or not a filter can be displayed for each table column in the
"Allocations" tab of the properties dialog and in the SIMATIC BATCH OS Properties control.
Default: Yes.
The attribute can be dynamized with the AllocationsListColumnFilterVisible name.
11.5.4

SIMATIC BATCH OS Batch Creation

11.5.4.1

CommunicationChannel

String.
Defines the communication channel for the selected BATCH project. Select the same
communication channel that you use in the "SIMATIC BATCH OS Master" control. This
ensures that you obtain the data for the batch creation from the relevant BATCH project.
Default value = 1.
The attribute can be dynamized with the CommunicationChannel name.
11.5.4.2

OrderCategoryName

String.
With this attribute, you specify a name for an order category in which batches will be created.
The name you enter for the order category will be displayed in the control.
Default: No name
The attribute can be dynamized with the OrderCategoryName name.
11.5.4.3

OrderName

String.
With this attribute, you specify the order in which batches will be created.
Default: None
The attribute can be dynamized with the OrderName name.
11.5.4.4

FilterRecipeEnabled

Boolean variable.
This attribute determines whether or not master recipes are displayed in the dialog for selecting
recipes/formulas. If the setting is "Yes", recipes are available for selection.
Default: Yes.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH OS controls
11.5 Control properties references
657