Overview Of The Properties Of Master Recipes - Siemens SIMATIC BATCH Operating Manual

A unit is not allocated. This occurs only when the operation is bound into the recipe unit
procedure (RUP) of a master recipe as a library reference.
All other header parameters are configured in the same way as for a master recipe:
Setting the properties of the recipe header parameters (Page 562)
10.4.6.14

Overview of the properties of master recipes

Definition
"Properties of master recipes" refers to all the information complying with the ISA-88 standard
(1995) that must or can be specified for a master recipe in addition to the recipe procedure.
These properties include the recipe name/version/status, material and production data
(formula), parameters, measured values and unit allocations.
Selectable master recipe properties
The table below lists all the properties that can be displayed and/or modified for each master
recipe in the "Properties of <recipe name>" dialog. These master recipe parameters are also
known as recipe header parameters.
Tab
General
Allocations
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
What is set or dis‐ Meaning/comment
played
Name and version Name of the master recipe, cannot be changed
Status Status display of the master recipe, e.g., "In progress"
Duration Here, the longest time for one execution of the recipe
is calculated. It is the sum of the step times of the path
through the recipe.
Formula category There may be a reference to an existing formula cate‐
gory.
Allocation list The unit allocations of the recipe specified by the de‐
tailed configuration of the recipe unit procedures (RUP)
are listed here; with information on the calculated start
time and duration.
In an additional dialog, you can modify the unit class
and preferred unit (along with the selection strategy).
When units are selected by conditions, the available
units can be specified by conditions.
BATCH Recipe Editor
10.4 Creating recipes
577