Siemens SIMATIC BATCH Operating Manual page 709

Procedure
1. Open an existing master recipe in the Recipe Editor. Make sure that the release has been
canceled.
2. Open the header parameters of the recipe and go to the "Allocations" tab. Select the
"Condition" check box for the "Reactor" unit. Only then will you be able to define a condition
for the unit allocation at the unit in the master recipe.
Image 12-20 Condition when allocating the unit class
3. Select the unit recipe procedure, here "Reactor", on which you want to insert the condition
for the allocation. Select "The longest out of use" as strategy in the "Allocation" tab. This
means one of the two units is allocated even if both are possible.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
12.8 How do I configure and use dynamic unit parameters?
Recommended procedure
709