Siemens SIMATIC BATCH Operating Manual page 563

Procedure in the BATCH Recipe Editor
1. Open the recipe.
2. Select the menu item Recipe > Header parameters.
Result: The "Properties of the <recipe name>" dialog is displayed with the header
parameters. In the dialog tabs, all the Properties of the recipe are available, which must/
can be specified for a recipe in addition to the recipe structure. This is the same properties
dialog that you can select with the Edit > Properties menu command in BatchCC.
Some of the properties (parameters) already have a fixed value due to the detailed
configuration of the individual recipe elements (RUPs, ROP, EPHs, transitions) following
the basic control. You can recognize parameters or settings that can still be modified by
the white editing fields.
3. Make the settings you require in the tabs and confirm with "OK".
Entering the properties
You enter the properties of the recipes in the following tab. Click the "Help" button for context-
sensitive help on each individual input or output box in the tab.
Reference to formula category
With the "Category" input box in the "General" tab, you assign the formula category with the
required structure for material and production data (formula) to the master recipe. This is only
possible when the formula category has already been created in BatchCC. You can set this
option in BatchCC later.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Recipe Editor
10.4 Creating recipes
563