Find" Dialog - Siemens SIMATIC BATCH Operating Manual

Context help references
14.5 BCC and RE Edit menu
Additional information
Selecting objects (Page 499)
14.5.5

"Find" dialog

Find recipe elements
You can use the "Find" dialog to locate specific elements in recipes, batch, or libraries. You
can use the search function in BatchCC, in the BATCH Recipe Editor, and in the BATCH OS
controls. The hit locations are shown in a table. If you double-click a table object, the
corresponding recipe opens in the editor and the hit location is highlighted in color. The search
result can be saved as a text file.
You can search for the following elements, for example:
● Text
● Data such as data type, control strategy type, unit, library reference, category, or material
● Structures such as cross-references, source and target interconnections, jumps,
monitoring, command steps, operator instructions, and synchronization
● Materials
● Status and extended status
● Recipe unit procedures, recipe steps and transitions
● Parameters
When a single master recipe is open in the Recipe Editor, you can also search for the process
cell reference object.
The search for these elements can be used in recipe steps, transitions, container objects (RUP/
ROP/SUB) in the recipe header or libraries.
The dialog is accessed via the menu command "Find" in the "Edit" menu, or via the
corresponding menu command from the shortcut menu. When the master recipe/library is
selected or open, you can also use the keyboard shortcut "Ctrl+F". You can search
simultaneously in multiple objects with multiple selection in a detail view.
1108
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA