Opening And Editing Recipes; Specifying The Master Recipes - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.5 Recipes
● Releasing recipes for testing (Page 316)
● Releasing recipes for production (Page 317)
9.5.4.3

Opening and editing recipes

Editing recipes
The recipe procedures of the master recipes and the library operations are created with the
BATCH Recipe Editor.
With the exception of deleting, that is only possible with the BatchCC, you can make any
modifications to recipe procedures and library operations with the BATCH Recipe Editor.
Proceed as follows in the BatchCC
To edit master recipes and library operations, the objects must first be opened:
1. Select the master recipe or library operation in the BatchCC
2. Select the menu command Edit > Open.
Result: The BATCH Recipe Editor opens displaying the graphic structure of the highest
hierarchical level of the recipe object.
9.5.4.4

Specifying the master recipes

Open tab dialog box
There are two ways in which you can open the "Properties of <Recipe name>" tab:
● In the BATCH Recipe Editor: See section "BATCH Recipe Editor"
● In BatchCC: described below
Follow these steps in BatchCC
1. Select the master recipe in the "Master recipes" or in one of its subfolders in the BatchCC.
2. Select the menu item Edit > Properties.
Result: The "Properties of the <recipe name>" dialog is displayed with the header
parameters. In the dialog tabs, all the Properties of the master recipe (Page 577) are
available, which must/can be specified in addition to the master recipe structure.
Some of the properties (parameters) already have a fixed value due to the detailed
configuration of the individual recipe elements (RUPs, ROPs, RPHs, SUBs transitions)
based on the process cell configuration in the engineering system. You can recognize
parameters or settings that can still be modified by the white editing fields.
3. Make the settings you require in the tabs and confirm with "OK".
302
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA