Library Reference (Insert Menu); Operator Instruction (Insert Menu) - Siemens SIMATIC BATCH Operating Manual

BATCH Recipe Editor
10.4 Creating recipes
10.4.5.3

Library reference (Insert menu)

Open
The window displaying the recipe step sequence that is stored in the library opens for the
selected object. To change the step chain in the library, you have to open it using Open library
object... (Recipe menu) (Page 1093).
Properties
The properties of the step elements and the subordinate sequential function block are identical.
By installing it in the corresponding unit column of a hierarchical recipe, the unit class and, if
selected, a preferred unit for creating a batch are specified. The data under the tabs "General",
"Input material", "Output material", "Parameters" (process parameters), "Process tags", can
be edited.
End the insert function
The insert function is closed for this object by clicking the selection arrow or a different object
to be inserted (menu or toolbar) or with ESC.
10.4.5.4

Operator instruction (Insert menu)

Overview
This function inserts recipe steps of the operator instruction type. The operator instruction
allows instructions to be displayed to operators during the processing of a recipe. A distinction
is made between the following operator instructions:
● Instruction within an NOP step
– Without acknowledgment: The recipe is not stopped. Example: Please put on the
– With acknowledgment: The recipe is stopped until an acknowledgment is entered.
● Instruction with input option (operator dialog) A recipe phase/operation is selected for the
function. Only the parameter set is applied. No function is started in the AS.
– Without acknowledgment, example: Entry of analysis process values.
– With acknowledgment, example "Manual dosing": The operator is instructed which
Without acknowledgment: Activation status "Activate and do not block batch" is selected.
534
protective goggles!
Example: Please close valve V127.
material to use and how much to add. The operator enters the process values of the
material added and confirms (acknowledges).
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA