Command Line Parameters For Batchcc - Siemens SIMATIC BATCH Operating Manual

To execute the key command "Ctrl+1" press the keys "Ctrl" and "1".
Use the "1" from the main block. The "1" in the numeric pad works only with some languages.
13.4

Command line parameters for BatchCC

Parameters
The following table shows the required command line parameters for starting BatchCC and
the viewer for archived batches.
Command line parameters
-v
-o
-c="x;y;dx;dy"
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Description
Starts the BatchCC in the "Viewer for archived
batches" mode
Starts the BatchCC in the 'Foreground' mode.
This means that the window is always on top
of all other normal windows including WinCC
Runtime. Other windows with the 'Fore‐
ground" attribute can, however, be on top of
the BatchCC window.
Permitted display area. The screen coordi‐
nates define the area in which BatchCC can
move.
x,y: Top left corner of the area, dx, dy width
and height of the area.
13.4 Command line parameters for BatchCC
Example
"C:\Program Files (x86)\SIEMENS\BATCH
\sbbatchcc32ux.exe" -v
"C:\Program Files (x86)\SIEMENS\BATCH
\sbbatchcc32ux.exe" -o
"C:\Program Files (x86)\SIEMENS\BATCH
\sbbatchcc32ux.exe" -c="0;0;1000;1000"
Appendix
721