Parameter Groups Of The Batch Process Cell; Batch Types" Selection - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
14.1.12.67

Parameter groups of the batch process cell

In this dialog box, you determine which dynamic parameters are assigned to which parameter
group. The parameter groups are arranged in the rows and the parameters in the columns of
a table. Select or clear the appropriate check boxes to specify the parameter group assignment.
Your selection applies to the entire batch process cell and not to each specific unit.
Filter and filter properties
You can select a unit as a filter using the "Sorting by unit" entry in the drop-down list. The filter
criterion limits the table display to the selected unit based on your selection.
● If no filter argument is selected, all parameter groups of the batch process cell are displayed
in the rows. The columns display the dynamic parameters of all units that have instantiated
the dynamic control strategy parameter. The parameter group assignment is enabled for
all dynamic parameters.
● When you select a unit, all parameter groups assigned to this unit are displayed in the rows.
The columns display all dynamic parameters of the units to which one of these parameter
groups has been assigned. The parameter group assignment is enabled only for the
dynamic parameters that match the unit used for filtering.
14.1.12.68

"Batch types" selection

Batch types selection
All imported equipment properties (locations) of the imported external process cell are listed
under the node.
Process cell data
For navigation in the process cell data.
Properties
Name of the selected object in the process cell data as a bold title.
Description: Description text for batch types of the external process cell.
Last changed on: The last change of the batch types is specified with date and time.
Batch types
Button
Generate
956
All configured equipment properties (locations) for SIMATIC BATCH are
created.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA