Using The Pcs 7 Wizard - Siemens SIMATIC BATCH Operating Manual

4. Configure PCS 7 OS standby server (if required)
– Insert hardware: BATCH application (stby) and communication processor for Industrial
– Project-specific: Assign computer and object names
– PCS 7 OS: Set up network connection
– NetPro: Set up the WinCC connection to the AS
– Configure Station Configuration Editor
5. Configure PCS 7 OS client (if required)
– Insert hardware: BATCH application client
– Assign computer and object names for specific project
– PCS 7 OS: Set up network connection
– In the WinCC Explorer: Check the computer name.
6. Configuring PCS 7 OS process pictures
– Save "SIMATIC BATCH OS Controls" template screen under a different name
– Allocate the plant hierarchy
7. Insert an additional AS into the project
– Insert SIMATIC 400 station
– Perform configuration steps starting from "Configure AS"
7.1.1

Using the PCS 7 Wizard

Possibly include in introduction or merge with introduction.
When you create a new single or multiproject, you can also use the PCS 7 wizard in SIMATIC
Manager. This allows you to create a single project or multiproject with one project, including
a PC station both for the BATCH server and for a BATCH client.
Starting the Wizard
In the SIMATIC Manager, select the menu command File > "New Project" Wizard and follow
the instructions in the dialogs.
Settings for SIMATIC BATCH
In the 3rd dialog box "Which objects will be used in the project?", the "SIMATIC BATCH" option
is available. Select this option and three further options appear on the right in the same dialog
box. Select the project version you require. Once the PCS 7 wizard is completed, the PC
stations are visible in the Component view.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Ethernet
Engineering
7.1 Basic engineering for PCS 7
123