Servicing The Cables - Oracle Netra SPARC S7-2 Service Manual

Servicing the Cables

The cables deliver power to and conduct signals between hardware components. The cables
are routed throughout the server. See
Modules)" on page 14.
The system supplies power to the cables even when the server is powered off.
Caution -
To avoid personal injury or damage to the server, you must disconnect power cords before
servicing the cables.
Description
Replace a faulty cable.
Remove a system cable as part of another
component's service operation.
Install a system cable as part of another
component's service operation.
"Component Locations (Storage, Power, NVMe, and Fan
Links
"Servicing the SAS Drive Signal Cable" on page 195
"Servicing the Drive Power Cable" on page 199
"Servicing the PDB Signal Cable" on page 203
"Servicing the NVMe Cables" on page 207
"Servicing HBA SAS Cables" on page 211
"Remove the SAS Drive Signal Cable" on page 196
"Remove the Drive Power Cable" on page 200
"Remove the PDB Signal Cable" on page 204
"Remove NVMe Cables" on page 208
"Remove HBA SAS Cables" on page 211
"Install the SAS Drive Signal Cable" on page 197
"Install the Drive Power Cable" on page 202
"Install the PDB Signal Cable" on page 206
"Install NVMe Cables" on page 209
"Install HBA SAS Cables" on page 213
Servicing the Cables 193