Oracle Netra SPARC S7-2 Service Manual page 167

d. Switch to the system console to view POST output.
Watch the POST output for possible fault messages. This output indicates that POST did
not detect any faults:
-> start /HOST/console
...
0:0:0>INFO:
0:0:0> POST Passed all devices.
0:0:0>POST:
0:0:0>Master set ACK for vbsc runpost command and spin...
The server might boot automatically at this point. If so, go to
Note -
remains at the OpenBoot prompt (ok) go to the next step.
e.
If the server remains at the OpenBoot prompt, type boot.
f. Return the virtual keyswitch to Normal mode.
-> set /HOST keyswitch_state=Normal
Set 'keyswitch_state' to 'Normal'
g. Switch to the system console and type:
# fmadm faulty
If any faults are reported, refer to the diagnostics instructions described in
Managing Faults" on page
4. Switch to the Oracle ILOM command shell.
5. Type:
-> show faulty
Target
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0
/SP/faultmgmt/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
Return to VBSC.
25.
| Property
| fru
| timestamp
| sunw-msg-id
|
| uuid
Step
| Value
| /SYS/CMP0/MCU0/CH0/D0
| Mar 18 16:02:56
| SPSUN4V-8001-OJ
|
| 2782ad0c-91cb-c780-9663-807f0bf806df
Verify a DIMM
3f. If the server
"Detecting and
Servicing DIMMs 167