Unmount An Nvme Drive - Oracle Netra SPARC S7-2 Service Manual

Unmount an NVMe Drive

Description
Remove a cable as part of another component's
service operation.
Install a cable as part of another component's
service operation.
Related Information
"Servicing SAS Drives" on page 85
■
"Servicing PCIe Cards" on page 169
■
"Servicing the Cables" on page 193
■
Unmount an NVMe Drive
This task uses pcie13 as an example.
1. Log in to Oracle Solaris.
2. Find the NVMe drive slot number.
This output has been edited for clarity.
# hotplug list –lc
Connection State
------------------------------------------------------------------
...
pcie13
...
3. Detach the device driver, and power off the drive slot.
# hotplug poweroff pcie13
4. Verify that the NVMe drive is unmounted.
The state of the slot must be PRESENT.
# hotplug list –lc
Connection State
------------------------------------------------------------------
pcie13
5. Remove the NVMe drive.
98 Netra SPARC S7-2 Server Service Manual • February 2017
Description Path
ENABLED PCIe-Native /pci@7a,0/pci8086,2f08@3/pci111d,80b5@4
Description Path
PRESENT PCIe-Native /pci@7a,0/pci8086,2f08@3/pci111d,80b5@4
Links
"Remove NVMe Cables" on page 208
"Servicing the Cables" on page 193
"Install NVMe Cables" on page 209
"Servicing the Cables" on page 193