Oracle Netra SPARC S7-2 Service Manual page 115

6. Compress the EMI shielding while you install and tighten the two screws.
7. Consider your next step.
If you installed the USB board as part of a replacement operation, go to
■
8.
If you installed the USB board as part of another component's removal or
■
installation procedure, return to that procedure.
See "Component Service Task Reference" on page
Finish the installation procedure.
8.
See "Returning a Server to Operation" on page
Related Information
"Remove the USB Board" on page 109
■
47.
235.
Servicing the USB Board
Install the USB Board
Step
115