Install a SAS Drive
6.
Press the release lever fully closed with a click, securing the drive into the
server.
Repeat from
7.
installing.
8.
Consider your next step.
If you installed a new or replacement drive, go to
■
If you installed a drive as part of another component's removal or
■
installation procedure, return to that procedure.
See
9.
Rotate the air filter up until the latches click.
See
"Install the Filter" on page
10.
Complete these tasks to finish the service procedure.
See:
"Returning a Server to Operation" on page 235
■
"Verify a SAS Drive" on page 95
■
94
Netra SPARC S7-2 Server Service Manual • February 2017
Step 3
through
"Component Service Task Reference" on page
82.
Step 6
for any additional drives that you are
47.
Step
9.