Oracle Netra SPARC S7-2 Service Manual page 173

See "Front Panel Components (Service)" on page 17
2. In Oracle ILOM, verify that each PCIe card is recognized.
-> show /System/PCI_Devices/Add-on
/System/PCI_Devices/Add-on
Targets:
Device_x
Device_y
...
->
where x, y, etc, are the slot numbers where PCIe cards are installed.
3. To verify that a single PCIe card is identified, type:
-> show /System/PCI_Devices/Add-on/Device_x
where x is the slot number where the PCIe card is installed.
If a PCIe card is not recognized, check its installation.
See "Install a PCIe Card" on page
4. Verify that a PCIe card is faulty.
For example, type:
-> show faulty
Target
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0
...
->
where y is 0 to 6.
If a PCIe card is faulty, you will see /SYS/MB/PCIEy under the Value heading.
■
If a FRU value different from /SYS/MB/PCIEy is displayed, see
■
Reference" on page 47
5.
Use the Oracle ILOM faultmgmt shell to identify the faulty component.
See "Identify Faulted Components" on page
Check the Fault class and Description fields for more information.
6. If a PCIe card is faulty, replace it.
176.
| Property
| fru
to identify which component is faulty.
27.
Locate a Faulty PCIe Card
and "Interpreting LEDs" on page
| Value
| /SYS/MB/PCIE1
"Component Service Task
Servicing PCIe Cards
30.
173