Oracle Netra SPARC S7-2 Service Manual page 63

b. Use your right thumb to pull the connector A release lever to the right away
from the left slide-rail (callout 1), and use your left hand to pull the connector
out of the slide-rail (frames 1 and 2).
No.
1
Remove the CMA from the rack and place it on a flat surface.
8.
9. Go to the front of the server and push it back into the rack.
Remove a Server From the 2-Post, 19-inch Rack
The server weighs approximately 21.5 kg (47.3 lbs). Two people are required to
Caution -
dismount and carry the chassis.
1. Disconnect all the cables and power cords from the server.
2. Support the weight of the server for removal.
Remove a Server From the 2-Post, 19-inch Rack
Description
Connector A release lever
Preparing for Service 63