Oracle Netra SPARC S7-2 Service Manual page 60

Remove the Cable Management Arm
Note -
its own weight. Throughout the remainder of this procedure, the CMA must be supported until
all the remaining connectors are disconnected and the CMA can be placed on a flat surface.
No.
1
2
b. Use your right hand to support the CMA and use your left thumb to push in
(toward the left) on the slide-rail latching bracket release tab labeled PUSH
60 Netra SPARC S7-2 Server Service Manual • February 2017
Once you have disconnected connector D, you must not allow the CMA to hang under
Description
Connector D release tab
(green)
Slide-rail latching bracket
release tab (labeled PUSH)