Oracle Netra SPARC S7-2 Service Manual page 91

8. Grasp the release lever and pull the drive out of the server.
9. Set the drive aside.
10. Repeat from Step 5
11. Consider your next step.
■ If you removed a drive as part of a replacement operation, install a new
drive.
See "Install a SAS Drive" on page
If you removed a drive as part of another component's removal or
■
installation procedure, return to that procedure.
See "Component Service Task Reference" on page
If you are not replacing the drive, install a drive filler in its place.
■
See "Install a SAS Drive" on page
Overheating hazard. There must be no empty drive slots.
Caution -
for any additional drives to be removed.
92.
92.
Remove a SAS Drive
47.
Servicing SAS Drives 91